Electricity Guzzlers in Indiana: Which Uses Electricity the Most and What You Can Do About It

Electricity BillThere’s good news and better news when it comes to electricity costs in Indiana. At 10 cents per kilowatt hour, the state has one of the lowest electricity costs in the country. The better news is you can pay even less by being more knowledgeable on appliances that use the most power and proactive toward bringing the costs down.

Hot and Cold

Based on the data provided by Spark Energy, most of the top users of electricity are those that require or are related to heating and conditioning. Earning the first place is air conditioners, which can cost you $1.50 per hour or roughly $10 a day. Water heaters, water pumps, space heaters, and hair dryers follow A/Cs and make up the five highest energy consumers among your appliances.

More than Your Appliances

Note, though, many factors can affect how much you pay in the end. One is your frequency of use. If you turn on the A/C for more than 10 hours a day, then expect to pay more than your neighbor with the same unit.

Your appliance choice also matters. Experts suggest investing on those with high energy star ratings. Although they tend to be more expensive, you save money in the long run since they consume less power.

Some people also think they need to buy a new appliance after five years. Consider this if your warranty no longer covers the unit, and it is already under performing. Every household, though, can benefit from regular maintenance such as air conditioning services in Indiana.

Specialists can detect potential or existing problems that result in higher electricity costs, as well as perform the necessary repairs. Moreover, they can give you practical tips on how to maximize your unit without spending more and when it is time to buy a new one.

Let your appliances be tools that keep on giving. Take a proactive approach toward lowering your energy costs today.

Industrial Fencing

Three Ways to Raise Your Commercial Property’s Value

Industrial FencingWith the rise of commercial buildings, property owners have to dig deeper into their bag of tricks to stay competitive. With so many choices, tenants are quite choosy when picking an office block. Hence, you need to ensure that your premises meet the highest standards to increase your returns.

Beef Up Security

In addition to the industrial wall or fencing around your property, you need to improve security. You can install a superior security system that includes video surveillance and alarms. Corporate clients are keen to keep their premises, property, and data secure from theft. As such, they will even pay a premium to keep their offices safe and secure. In today’s world, a security breach would spell doom for a company and could lead to its downfall.

Hire a Maintenance Company

Other than keeping the premises clean and tidy, you need to ensure all the facilities are in excellent working condition. From the elevators to the electrical and plumbing systems, you need to ensure they are working well. Otherwise, facilities issues could lead to a high tenant turnover rate and lower your income. Regular maintenance ensures that all systems are functioning properly. This also increases the longevity of your amenities, which translates into considerable savings.

Improve the Curb Appeal

Corporations take enormous pride in their brand image and will go to great lengths to ensure it remains positive. As such, they will not rent any office space in a seemingly neglected building. Clients tend to judge a company’s capability based on their offices and location. Hence, you need to ensure that the building projects a safe and appealing image at all times. Repaint peeling walls, cracked pavements, and parking spots as soon as it happens.

With the rising competition for commercial tenants, you need to stay ahead of the curve. With a bit of effort, you can make your property stand out and attract the right kind of clients.

A Professional Jeweler

The Beautiful Stones Made of Paint Buildup

A Professional JewelerWhen people think of leftover plastic, we usually think of discarded garbage in landfills, or pollutants floating around in the water. Rarely do we see old plastic and decide to turn it into jewelry. Yet this is exactly what happened in Detroit after the discovery of a substance known as “fordite.”

Fordite, which is sometimes called “Detroit agate,” is a hard, multi-layered stone made from layers of paint deposits from car factories. Fordite today is rare, because of the implementation of downdraft paint booths and more efficient paint application processes. This prevents paint from piling up and solidifying like they did in the past.

Today, it is a sought-after material by jewelers, who buff and polish the bits of plastic into a high shine.

Where Does Fordite Come From?

Detroit was a major industrial town in the past. The city was filled with car factories that assembled and painted the vehicles to be then shipped off to dealerships. Workers would spray the paint onto the cars, making sure to cover every inch of the exteriors.

As the excess paint drips off molding, the paint pools on the metal racks which were used to transport cars to the oven. As the paint bakes to cure and harden it, the small pools of drip solidify as well.

As the years pass and more cars go through the factory’s paint booths, more layers of paint are added to the fordite. Eventually, this forms a rock-solid mass that is hard enough to cut and polish in a similar fashion to gemstones.

The resulting stone has a distinct layered effect, forming unique, rainbow colored swirls. Car paint is made of resin and enamel, which turns into an agate-like stone when layered and baked together.

Beautiful Jewelry

The most sought after pieces of fordite were the ones that came from the 1960s. This is because in the 1940s, cars typically featured only black or brown enamel, which resulted in boring looking fordite. In the 1960s, however, colorfully painted cars became very popular, giving rise not only to a multitude of bright colors, but also to special effects paints with metallic or glittery finishes.

Fordite is an incredibly popular material used in jewelry. Their rarity and unique look have proven to be very profitable. It is definitely an interesting piece to hang from your neck and lobes.

Inspect and Cross-Check: Guidelines When Buying a Second-Hand Crane

Second-Hand CraneThere are times when a company’s only option is second-hand tools. It happens when brand new is simply not possible at the moment.

Does this mean it can settle for less? Certainly not. Like in brand new shopping, there are several points to consider in second-hand equipment, like a crane, Wong Fong Engineering cites.

Info to Look For

Look for the following: its purpose for the previous owner, service frequency and its classification. Request for maintenance records too.

Does it follow or not the maintenance schedule, as well as the manufacturer’s standards? The answers must be both yes, since its remaining value and overall safety depends on these factors.

Have It Inspected

Ask a local representative to check the conditions it is currently in. As a potential buyer, you will be responsible for its proper use and for fixing any previous misuse. System malfunctions are very expensive and could pose safety risks too. Hence, buy from legit dealers for warranties and open inspections.

Must-inspect parts of the crane are the motor and operator controls, mechanical and electrical components. For some potential issues, here are the common ones:

  • An engine that won’t start
  • Strange noise
  • Leaky parts
  • Oil in the coolant or vice versa
  • Excessively loose pins
  • Welds on mechanical component

Cross Check

Find out if what you need is a match to what’s available. List what you need and compare using the different crane classifications. Does its loading capacity (e.g. weight load, load per hour/day) match your material handling needs? How about its speed and travel distances? Check out also the type of crane service you need. Is it normal, heavy or severe? Use the crane’s rated capacity as your guide.

How about the crane’s application? Does it match with what you intend to use it for? There are also specialised cranes and variations in structural components and hoists.

Overall, the used crane you should buy is the one that protects your people, your company and your investment. Make dealers that have related services a priority.

Best-loved Appliances in a Kiwi Home

Home Appliance in New ZealandKiwi homeowners are proud of their gadgets and electronic home appliances.

It comes as no surprise, as they are some of the most tech-savvy people. Kiwis love their smart devices and their ovens, stoves and refrigerators. New Zealand is often one of the first countries tech firms choose to launch their new offerings. Big electronics brands such as Samsung have a huge following in the home appliance-loving Kiwis.

They do not seem to have any trouble keeping that love affair, with the number of stores and appliance repair services available in the country. Among the many kinds of kitchen appliances, which ones do Kiwis love the most?

Induction Cooktops

Earlier this year, award-winning designer Mal Corboy named induction cooktops as a hot kitchen appliance in Kiwi homes in an interview with Stuff.co.nz. As homeowners are willing to spend more to have a high-end kitchen, they choose innovations to upgrade their cooking arsenal.

Induction cooktops take the top spot among the Kiwi homeowners’ choice of kitchen innovations, making up 60 per cent of appliance store Kitchen Things’ sales at that time. The Kiwis’ openness to induction cooking, which involves direct heating, makes these cooktops a hit in the kitchen. It does not hurt that they are energy efficient as well.

Ovens

Steam and microwave-combi ovens are also top-selling appliances. Kiwis are becoming more aware of the advantages of cooking with steam, thus making steam ovens a welcome addition to their kitchens. Microwave-combi ovens, on the other hand, allow them to whip up meals faster, which makes them ideal tools for quick dishes.

Wine Cabinets

Often the subject of magazine features, wine cabinets are a fixture in high-end kitchens. They are a symbol of glamorous living (and dining), and Kiwis who are big on kitchen envy want them in their homes. They keep fancy drinks at the ideal drinking temperature and condition, after all.

Kiwi homeowners are fans of kitchen appliances, and these are just a few of the best-loved ones. Which ones do you want in your kitchen?

Why Does Arc Spray Galvanising Only Work on Certain Metals?

Metal in New ZealandArc spray galvanising is a type of metal spraying procedure that protects metals from corrosion and degradation. It is the process of spraying a prepared surface with small, molten particles of zinc or a zinc alloy. This creates a uniform coating that completely envelops the metal.

Companies like Euro-Blast NZ Ltd use the arc spray galvanising technique for steel and iron products. Architectural elements, such as fences, grates and steel staircases often use galvanised metals. The process creates a highly effective barrier coating against moisture and offers a clean surface for any subsequently applied top coats and sealants. Not all metals, however, can be galvanised.

How Arc Spray Galvanising Works

The ‘arc’ in arc spray galvanising refers to the energised wires that are fed through a feeder, and into the gun head of the spraying device. One wire has a positive charge, while the other has a negative charge. It forms an arc that meets in the middle, which creates intense heat.

The heat created by these wires melts the zinc in the feeder, which is then sprayed onto the prepared surface. The droplets hit the surface of the metal and flatten upon contact, creating a thin layer of molten metal on the surface. As the droplets spread out, they harden and create a strong mechanical bond with the metal underneath.

Only Certain Metals Work

Since the arc spray galvanising forms a mechanical bond, or a chemical bond, with the metal, it is not suitable for just any kind of metal. Galvanising works well on iron and steel because the chemical structure of these metals are compatible with the zinc used in the spraying process.

The zinc will not adhere to metals that it is not compatible with. For example, metals, such as aluminium or alloys that contain silicon will react negatively to the zinc. It will reject the zinc, and it will simply flake off the surface. It will also not adhere to materials, such as plastic.

Arc spray galvanising is a sophisticated chemical process that requires a deep understanding of the materials used. This is why the process is only effective for specific applications.

When the Force is Weak with Your iPhone, it has ‘Touch Disease’

Apple DevicesWhile Apple continues to lead the innovation market, it’s also home to some of the most recurring issues in technology.

Taking aside the exploding Samsung Note 7, Apple products such as the Mac and iPhone almost always need repairs despite their promise of quality.

Until recently, the most popular issue consumers experience is a cracked screen.

However, according to Business Insider, there is now a contender for the costliest Apple repair. ‘An increasing number of iPhone users are reporting an issue with iPhone 6 and iPhone 6 Plus phones freezing up and becoming unresponsive to touch’.

A Software Problem

Despite the efforts of Apple to lower the cost of screen repair by mass producing DIY kits, the infamous ‘Touch Disease’ in turn infects thousands of users each day. Based on the reports from customers in California and Canada, there’s an active evidence that the Touch Disease, which renders the phone unresponsive and impossible to use, is already widespread dilemma. The problem is so bad that there are class action lawsuits over the whole matter and potentially more on the official acknowledgement of the company.

Detecting if an iPhone has the Infection

Compared to the simple lagging of Apple devices due to limited memory, the Touch Disease has telltale signs. When you see a flickering grey bar at the top of the screen or if the entire screen becomes intermittently unresponsive, then you have it. By far, the only reported versions affected are iPhone 6 Plus models released for sale in 2014.

On Fixes, Warranties, and Repair Shops

For users with expired or slightly used warranties, official Apple stores and partners quote on average $100 to $329 fee for replacement cost. On the other hand, third-party repair shops offer far better cost-effective repairs, perfect for those who want to keep costs minimal.

The best course of action will be to have the Touch Disease exclusive to iPhone 6 Plus models. On the off chance that the disease migrates to other models, Apple can potentially face a breakdown much worse than exploding devices.

Solar Panels: Getting the Most Out of It

Solar PanelsIf you’re thinking of installing a renewable energy system like solar panels, you may be wondering how to make the most of it. The best advice all goes down to reducing the amount of energy you consume. You can also gain the maximum benefit by improving your home’s efficiency through draught-proofing and using energy-efficient appliances.

Ecolutiongroup.com​ and other solar panel installers share a few more ways to get the most out of your energy system:

Power in the Daytime

It is best to use electrical appliances during daylight hours whenever possible. Keep in mind that solar panels produce the majority of electricity when it is sunny, so this is the best time to turn your electrical appliances on. This means using your electric cooker or electric shower during the daytime rather than after the dark.

One Appliance at a Time

Keep in mind that even though when it is sunny, the panels may not provide enough electricity to run more than one major appliance at a time. To get as much as free electricity as possible, use or turn on your appliances at different times throughout the day. Don’t use them on all at the same time, as you are likely to use more power than your solar panels generate.

Generate More Power

While solar panels can generate power even when it is cloudy, they produce more electricity when it is sunny. Be sure to maintain or cut back the trees, shrubs and hedges in your garden. This is to make sure they won’t cover or shade your solar panels, which can stop them from generating as much as free power as they could.

Use Storage Batteries

Storage batteries are a great way to store excess solar power without taking it back to the grid. These will allow you to have an energy supply at night or when the sun isn’t shining so bright. This helps in reducing your dependence on conventional energy suppliers. Keep in mind, however, that storage batteries can be expensive and may need replacement between five and 10 years.

Get the best out of your panels by making a few changes in your daily routine. This will help you more save money and do something good for the environment.

Don’t Forget These Important Factors When Giving Business Gifts

Business GiftsBusiness owners like you give gifts to show appreciation, gratitude, and interest to your clients or business associates. Doing so helps strengthen your relationship with them.

If you’re having a hard time thinking of an appropriate corporate gift, it’s best to do some thorough research. Don’t hesitate to get some professional help when things get complicated. To come up with the best corporate gift, industry experts at Glazer Promos share the key factors you have to keep in mind.

  • Business Goal

Business promotion is one of the many reasons for giving corporate gifts. If you want to gain positive feedback, make sure to give importance to what your clients and employees want and need. Give gifts that are useful and fit their preferences.

  • Options

There are numerous options for business gifts. Take time to check on them. Don’t settle for generic items, as it may make clients and employees feel unimportant. The best gift would be something carefully thought about.

  • Budget

You should always include corporate gifts in your company budget. You may adjust it if needed; but as much as possible, you should not overspend. Moreover, make sure to get what you pay for.

  • Quality

Apart from price and usefulness, quality is one factor you should always think about. It is important to choose reasonably priced items that are of high quality. As mentioned earlier, you should make sure to get what you pay for.

  • Supplier’s Reputation

You can find many suppliers, but you should be careful when choosing one. Do your research and look for companies that have earned a good reputation. Consider the products they offer, their customer service, and their overall relationship with clients. Choosing the wrong supplier can lead to different problems.

For whatever occasion or reason, your gift must come from the heart. It must convey whatever message you would like to tell your recipient. To learn about great corporate gift ideas, consult a professional.

Solar Power is More Affordable than Ever

Solar PowerSolar power is not new technology. In fact, solar panels have existed since the 1950s and were used to power satellites in space. Cost is one of the reasons it has not been implemented widely. It was too costly for the average citizen.

With the latter half of the 2000s came a boom in renewable energy. Solar panels require lower costs to manufacture, and some governments began subsidising its citizens to allow them to make the switch to renewable energy. You can now buy solar panels yourself from companies like Ecolution. It is as easy as purchasing a new satellite dish or an air conditioner.

Affordable Solar Panels

The UK used to provide subsidies to citizens who choose to install solar panels in their homes. As of 2015, however, the government cut the solar subsidy scheme to free funds for other projects. The solar industry worries that the timing is off, as solar power is believed to not yet be self-sufficient at this point.

Nevertheless, solar panels are more affordable than they have ever been in the past. They are 80% cheaper now than they were half a decade ago. In fact, the British solar market was virtually non-existent before the 2010s. Current trends will only see an increase in solar energy usage for the next few years.

Cheaper, Cleaner Energy

The manufacture and the installation of solar panels are still the most expensive parts of the process. But once the initial overhead costs are addressed, solar energy pays for itself. In the UK and in Germany, solar and wind energy cost less than fossil fuels.

The great thing about solar is it has no recurring costs. Fossil fuels require constant mining and refinement to keep up the generators running. On the other hand, solar takes its energy entirely from the sun, which is an almost unlimited source of power. You do not need any extra digging, refinement or transport to deliver the sun’s rays to your panels.

Hopefully, solar energy only continues to become more affordable. In the future, we may not need anything but renewable energy.